Toolbars

The AG Systems Nitromaster Pull Type Toolbars are designed for today’s modern farmer. Built to be pulled by the largest 4 x 4 tractors, these extra-rugged applicators will stand up where others have failed.

The main frame is formed from 4″ x 6″ Tubular steel with 1/2″ walls. Designed to carry a heavy load of disc covers, rolling coulters and spring bundles, even at 15″ spacings the Nitromaster Toolbar will maintain the balance needed for smooth, easy pulling.

7200 Series Toolbar – Pull Type Applicator 34′ – 41′

agsystems_toolbards-7200-01Designed and built for today’s modern farmer.

Pre-plant NH3 Application • Side-Dress NH3 Application • Strip-till or Zone Banding

Whatever your requirements the 7200 is flexible enough to fulfill your in field needs.

Features:

  • Heavy Duty 4″ x 6″ x 1/2 ” wall tubing will stand up where others have failed
  • Designed to carry the heavy loads of coulters, spring bundles & disc covers
  • Built to adapt to most all row spacing
  • Adjustable walking tandem axles
  • Master/Slave designed hydraulic lift system provides a uniform lift
Specifications

  • Available in sizes 21′, 27′, 32′ & 42′
  • Tubing size 4″ x 6″, 1/2 wall
  • Main frame width 13’9″
  • Transport height 12’2″
  • 10,000 pound capacity pole jack
  • Adjustable walking tandem hyd lift wheels
  • 11L x 15 Implement tires on 8″ rims
  • Hydraulic wing folds to 117 degrees
  • 38″ center to center between ranks
Options

  • Row markers for strip till applications
  • 7-pin flashing/warning light kit
  • Hydraulic selector valve
  • Rolling coulter assemblies
  • Single or double spring loaded disc covers
  • Meter/Controller assemblies
  • Dual manifolds
  • Spring bundled or coil shanks
agsystems_toolbards-7200-02New minimum maintenance coulter design! Totally greaseless hub & frame. Patent Pending. agsystems_toolbards-7200-03The only minimum maintenance disc cover. Spring loaded, offered in 13″ or 18″ blades. Greaseless hub design. Patent Pending.
agsystems_toolbards-7200-04This extra heavy duty Cat III, combination tractor – truck Perfect Hitch is adjustable to fit most application needs. agsystems_toolbards-7200-05All Nitromaster Toolbars feature wings that float up and down to insure uniform nutrient placement.
agsystems_toolbards-7200-06Steel Hinge Plates and 1-3/4″ Steel pins are the heaviest in the industry. All hinge points are greaseable. agsystems_toolbards-7200-07Adjustable, telescoping rear hitch extends 12″ and swings 26″ side to side.

 

8000 Series – Pull Type Applicator 34′ – 42′ – 52′

agsystems_toolbards-8000-01Pre-plant NH3 Application • Strip-till or Zone Banding

Designed to carry the heavy loads required by today’s custom applicator

Features:

  • Heavy Duty 4″ x 6″ x 1/2 ” wall tubing will stand up where others have failed
  • Designed to carry the heavy loads of coulters, spring bundles & disc covers.
  • Built to adapt to most all row spacing
  • The only true walking tandem axle in the industry
  • Master/Slave designed hydraulic lift system provides a uniform lift.
  • Featuring the largest walking tandem in the industry
  • Uniquely balanced for smooth easy pulling both in and out of the field.
Specifications

  • Available in sizes 32′, 42′ & 52′
  • Tubing size 4″ x 6″, 1/2 wall
  • Main frame width 16′
  • Transport height 13’4″
  • 10,000 pound capacity pole jack
  • Hydraulic tandem axle lift wheels
  • 11L x 15 Implement tires on 8″ rims
  • Hydraulic wing folds to 117 degrees
  • 38″ center to center between ranks
Options

  • Row markers for strip till applications
  • 7-pin flashing/warning light kit
  • Hydraulic selector valve
  • Rolling coulter assemblies
  • Single or double spring loaded disc covers
  • Spring bundled or coil shanks
  • Meter/Controller assemblies
  • Dual manifolds
  • 3/8″ or 1/2″ EVA hose
agsystems_toolbards-8000-02New minimum maintenance coulter design! Totally greaseless hub & frame. Patent Pending. agsystems_toolbards-8000-03The only minimum maintenance disc cover. Spring loaded, offered in 13″ or 18″ blades. Greaseless hub design. Patent Pending.
agsystems_toolbards-8000-04This extra heavy duty Cat III, combination tractor – truck Perfect Hitch is adjustable to fit most application needs. agsystems_toolbards-8000-05All Nitromaster Toolbars feature wings that float up and down to insure uniform nutrient placement.
agsystems_toolbards-8000-06Steel Hinge Plates and 1-3/4″ Steel pins are the heaviest in the industry. All hinge points are greaseable. agsystems_toolbards-8000-07Adjustable, telescoping rear hitch extends 12″ and swings 26″ side to side.

3000 Series – 3 Point Applicator 32′ – 27′ – 41′

agsystems_toolbards-3000-01The 3000 Series Nitromaster Toolbar is the most rugged 3 point toolbar in the industry today. This 4″ x 6″ heavy walled toolbar features a Cat II and a Cat III 3 point hitch. Hydraulic wing fold is standard with the wings folding to 117 degrees.

Features:

  • Adjustable gauge wheels with 6.70 x 15 tires
  • Nurse tank hitch is telescoping and adjustable
  • Inline transport for long distance towing
  • Built to handle the weight of Coulters, Disc Covers and Spring Bundled Shanks
  • Built to adapt to all row spacings
  • 12′ wide center section
agsystems_toolbards-3000-02 agsystems_toolbards-3000-03

Nitromaster 8500 Series 62′- Pull Type Applicator

Pre-plant NH3 • Fall Application • Strip-till or Zone Banding

agsystems_toolbards-8500-01

The all new 8500 is Big, Strong and Flexible to handle all of your field requirements.

Features:

  • Super Heavy duty 6″ x 6″ x 1/2″ wall tubing the heaviest on the market today.
  • Designed to carry the heavy loads of coulters, spring bundles & disc sealers.
  • Built to adapt to most row spacing
  • Master/Slave designed hydraulic lift system provided a uniform lift.
  • Heavy duty walking tandem axles.

agsystems_toolbards-8500-02

The Most Durable Fertilizer Coulter Built Today

agsystems_toolbards-37-011 Year Limited Warranty

A Totally Greaseless Hub Design

  • Preloaded 525# cutting pressure
  • Capable of delivering up to 1040 # of residue slicing pressure
  • 2-9″ chrome silica alloy springs
  • 6″ vertical blade travel
  • 36° swivel movement left to right
  • 1″ x 3″ shank
  • 4 bolt wagon hub
  • Choose from 3 different models
  • AG-36 Single Spring
  • Ag-37, AG-38 Double Spring designed for strip till or deep placement of fertilizer

Built heavy enough to withstand today’s farming practices.

Patented “Lubed for Life” Seal System!

  • This totally sealed hub is prepacked with grease – no grease zerk is needed.
  • Hub capacity is rated for 2,760 lbs. – twice the capacity of any coulter on the market.
agsystems_toolbards-37-smoothbladeSmooth Blade agsystems_toolbards-37-notchedbladeFluted Blade agsystems_toolbards-37-flutedbladeNotched Blade

 

 Choose from 3 different knife options:

  1. Dry or liquid forward swept knife, designed for deep placement of fertilizer
  2. NH3 knife with tube
    1. 3/8″ tube
    2. 1/2″ tube
  3. High Pressure nozzle bracket, designed for liquid fertilizer injected into the ground.

agsystems_toolbards-37-02

 

The Most Versatile Ammonia Sealer in the World

agsystems_toolbards-discseals-01 Specifically designed for No-Till farming practices

  • 1 Year Limited Warranty
  • A Totally Greasless Hub Design

Built Specifically for the Custom Applicator

agsystems_toolbards-discseals-02 A Hub Built for High Application Speeds

  • 1-1/6″ Spindle welded to a 6″ heavy-duty plate
  • 1″ Tapered roller bearings
  • Slotted nut with cotter pin
  • Counter-sunk dust cap keeps the dirt out
  • No grease zerks
  • Patented hub seal design really keeps the dirt out!
    • Actually 7 seals in one all individually grease packed 10 times heavier then the conventional grease seal
    • Press Fitted rubber design provides a better seat
    • Seal is pressed onto the spindle and rotates with the hub
agsystems_toolbards-discseals-03 Blades Are Reversible

  • 13″ Smooth edged blades
  • 18″ Smooth or Notched edged blades
  • Fits all standard NH3 shanks
  • Blades are adjustable
  • Blades are set forward to capture and replace soil
  • Heavy-duty 2-1/2″ x 1/2″ arms
  • Extra heavy-duty reinforced “A” frame with adjustable mounts
agsystems_toolbards-discseals-04 Unique Spring Design

  • Relieves “A” frame stress
  • Allows trash to flow through freely
  • Spring is fully loaded in the rest position
  • Won’t compromise the knife depth due to the Spring bottoming out
  • No need to adjust the disc cover if running at different depths
  • Features the most travel of any spring loaded disc cover
    • 13″ blade has 11″ of vertical travel
    • 18″ blade has 14″ of vertical travel
agsystems_toolbards-discseals-05 Also Designed in Single Blade Package*With all of the same features found in the double disc package

 

 

 

 

 

New Super Shooter Stand

Download Spec Sheet
Super Shooter Stand    Super Shooter Stand

Super Shooter Stand